Printable Narwhal Tusk
$5.00
This Narwhal tusk is 2.5m long! Print it out, paint it, and hang it on your wall. Be cooler than your friends.
Description
Printable Narwhal Tusk
3D print this narwhal tusk and hang it on your wall. Convince your family and friends that you come from a long line of experienced narwhal hunters!
In addition to a single long tusk model file, we also provide the tusk files pre-sectioned in two ready-to-print versions! Including a version split into 8, 312.5mm sections for larger printers (Like a Creality CR10s for example), and a version split into 12, ~210mm sections for smaller printers (Like an Ender 3 for example).
The full length narwhal tusk is 2.5 meters long! If that’s too intimidating for you, we also provide several alternative middle sections that can act as a terminating end.
For example: say you wanted a short tusk and you had a smaller printer, you could print
section 1 through 5 of the 12-section files and then print the “AlternativeEndSection6.stl”
to terminate the tusk at the sixth section instead of printing the normal 12 sections.
Our tested print settings: FDM
We successfully printed this model in PLA on an FDM printer using these settings:
- Nozzle size: 0.4mm
- Layer height: 0.28
- Wall thickness: 1.2mm
- Infill: 10% grid
- Support material: True
Additional information
Finish |
---|